Page 6 - The finished wall hanging

Page 5 - the completed wall hanging

The round piece of wood was painted using Alchemy paint. Water soluble machine stitched tabs

were hand sewn in place. The orange backing fabric was hand sewn around the edges creating a neat finish to the back.

11 March 2012 - the completed wall hanging - pole length 21.5 inches - hanging 15.5 inches wide x 48.5 inches in length - through the drawn thread work you can see the orange backing fabric.

The back of the wall hanging.

Close up pictures showing sections of the wall hanging.

Evaluation of completed work

The completed embroidered assessment piece for Module 6 is a wall hanging based on the design topic of peat erosion and conservation.

The resulting piece reflects the open, dry, cracked and eroded areas of peat land. The orange area reflects unprotected and scarred areas, open to the elements. The orange colour helps to reflect the concern and issues regarding erosion – acid rain, acid soil, impact on the quality of water supplies. The drawn thread work with the orange showing through shows how protection measures are helping the eroded areas to repair but they still have some exposure to the elements.

The mid blue areas reflect the crumpling, falling and rippled lumps of peat that can be found on Kinder Scout, while the dark blue areas look more solid and conserved but these are in the minority.

The criss-cross shapes of the hand-stitches reflect the roots of vegetation and bog plants knitting together the soil. The glistening thread used throughout the piece gives a watery dewey effect – which is what you would expect to see in a peat bog.

I have taken care with the finishing touches eg with the backing – even though it is not seen I have machine embroidered a beautiful textural surface to reflect the stitching on the main design.

It’s a stunning and beautiful piece of work which I’m extremely pleased with. It looks dramatic; is rich in colours and texture and changeable. I feel the piece of work reflects many aspects of peat erosion and conservation very well.

This is the first wall hanging I have made. It has been a challenging and enjoyable piece of work. Having worked on much smaller pieces of work before, this has taken much longer than expected but well worth the effort involved and something that I feel very proud of.

Page 4 - finishing touches

For the backing I decided that through the drawn thread work I wanted the orange colour to slightly come through to help in bringing the design together and to add further depth. I also wanted a slight sparkle rather than a matt colour coming through. I decided to use pumpkin dyed silk with organza underneath. Twin needle stitching using the same shapes as on the main design was used. Below is work in progress.

I decided to use a round piece of wood for the wall hanging. I experimented with various threads and shapes using water soluble fabric to create "tabs" for the hanging. I particularly liked the orange sample - the stitching reflects the shapes in the wall hanging very well. However, I felt the orange colour drew the eye away from the main central area in the design. I decided that mid and dark blue threads would look better.

I made some machine stitched wires using mid and dark blue threads thinking these may reflect the open stitched areas. While the colours looked better they didn't pull out the shapes, fabrics and threads used in the hanging.

Some further experiments.

Further experiments - I particularly liked the middle one which was a combination of thick dark blue thread and a mid blue thread. However with this particular sample I felt the shapes were too open. I decided to use the shapes created in the orange one but to use thick dark blue and mid blue machine thread for the "tabs".

Page 3 - mid and dark blue area

During October 2011, work started on the mid and dark blue fabrics. Using the lines of the design I decided that I would make 2 large pieces of the dark blue and 4 pieces of the mid blue. Organza was placed behind silk fabric and twin needle stitching used before cutting out some of the triangular shapes.

Machine stitched tucks were added to create additional texture.

26 October 2011 - started to hand sew on pieces of dark blue.

In this close up you can see an area pinned in placed ready to sew and the hand stitching used.

By the end of November 2011, the dark blue areas had been hand stitched in place. Work continued on preparing the mid blue pieces during November and December. Mid blue pieces were hand stitched in place using the same stitches and thread as on the darker areas to help to bring the design together.

January 2012 - just one piece of mid blue to be applied.

February 2012 - once all of the mid and dark blue sections were on - a line of straight stitching was added around the orange areas.

Page 2 - applying orange fabric and drawn thread work

14 September 2011, the orange fabric was placed behind the backing and machine stitched in placed from the top. Fabric was cut away to reveal the orange colour underneath.

18 September 2011 - tracing paper was removed from parts of the design for drawn thread work. Threads were removed and columns of machine stitching added.

Page 1 - Commencing work on wall hanging

At the beginning of August 2011, I dyed large pieces of silk and organza fabric in dark blue, mid blue and pumpkin. Some of the larger pieces of fabric were a lighter colour than required and were dyed again.

The design was traced out and the different areas were coloured in using pencil. The design was placed on the background fabric and the outline of the design was machine stitched in place (pictured below).

9 August 2011 - commenced machine stitching pumpkin coloured silk and organza, cutting out sections between the stitching and adding tucks. I worked this as one piece rather than different pieces.

By 12 September 2011, the work was completed and ready to be placed behind the dark blue background. It looks quite blue in the photo but in natural light looks more orangey.